300-625 DCSAN: Implementing Cisco Storage Area Networking

Level
Advanced
Duration
60 hours
Course Fee
₹10500
*Inclusive of GST   

The Configuring Cisco MDS 9000 Series Switches (DCSAN) v3.1 course shows you how to implement, manage, and troubleshoot Cisco® MDS 9000 Series Switches, to build highly available, scalable storage networks. Through expert instruction and extensive hands-on practice, you will learn how to deploy and use capabilities such as Virtual Storage Area Networks (VSANs), Role-Based Access Control (RBAC), N-Port Virtualization (NPV) fabric security, zoning, automation with NX-API, Slow Drain Analysis, SAN analytics, Fibre Channel over TCP/IP (FCIP) tunnels, and more.

Training Type
Classroom Online Corporate
Batch Timings

For the latest training schedule, please check the Schedules.

Weekdays
  • Early Morning
  • Morning
  • Afternoon
  • Evening
  • Fastrack
Weekdays
  • Morning
  • Afternoon
  • Evening
  • Sat / Sun
  • Sunday Only

Training is available in small groups as well as on one-to-one basis. Get in touch.

300-625 DCSAN: Implementing Cisco Storage Area Networking

Level
Advanced
Duration
60 hrs.
Course Fee
₹10500

The Configuring Cisco MDS 9000 Series Switches (DCSAN) v3.1 course shows you how to implement, manage, and troubleshoot Cisco® MDS 9000 Series Switches, to build highly available, scalable storage networks. Through expert instruction and extensive hands-on practice, you will learn how to deploy and use capabilities such as Virtual Storage Area Networks (VSANs), Role-Based Access Control (RBAC), N-Port Virtualization (NPV) fabric security, zoning, automation with NX-API, Slow Drain Analysis, SAN analytics, Fibre Channel over TCP/IP (FCIP) tunnels, and more.

Training Type
Classroom Online Corporate
Batch Timings

For the latest training schedule, please check the Schedules.

Weekdays
  • Early Morning
  • Morning
  • Afternoon
  • Evening
  • Fastrack
Weekdays
  • Morning
  • Afternoon
  • Evening
  • Sat / Sun
  • Sunday Only

Training is available in small groups as well as on one-to-one basis. Get in touch.

Course Introduction

This instructor-led course offered by RSTFORUM will enable you to deploy and troubleshoot the Cisco Nexus® 9000 Series Switches to support performance, resiliency, scalability, and enhanced operations for data centers. You will gain knowledge and skills through Cisco’s unique combination of lessons and hands-on practice using enterprise-grade Cisco learning technologies, data center equipment, and software so that you succeed in today’s demanding data center operations roles.

Course contents are based on Cisco course outlines.

  • Dedicated Monitoring to evaluate and report candidates progress
  • Extensive hands-on lab exercises
  • Industry-acclaimed, experienced and certified instructors
Course Highlights
  • Project manager can be assigned to track candidates’ performance
  • Curriculum based on course outlines defined by Cisco.
  • This Instructor-led classroom course is designed with an aim to build theoretical knowledge supplemented by ample hands-on lab exercises
  • Facility of Lab on cloud available (based on booking)
  • Courseware includes reference material to maximize learning.
  • Assignments and test to ensure concept absorption.
  • Courseware includes reference material to maximize learning.
  • Assignments and test to ensure concept absorption.
  • Repeating of lectures allowed (based on seat availability)
Course Objectives

After completing this course, you should be able to:

  • Discover and describe the Cisco Multilayer Director Switch (MDS) platform of multilayer switches and directors. Describe the MDS hardware, NX-OS operating system, Data Center Network Manager (DCNM) management software, and key architectures of the platform, such as FC and Fibre Channel over Ethernet (FCoE)
  • Describe key product features of the MDS platform, including VSANs, RBAC, NPV, port channels, zoning, device aliases, inter-VSAN routing (IVR), and fabric security
  • Configure and implement the Cisco MDS switches and platform features, such as initial configuration, building a fabric, building a SAN extension, and configuring inter-VSAN routing for that purpose
  • Configure FCIP tunnels
  • Resolve issues and troubleshoot FC domains, zones and zone merges, and switch boot and firmware upgrades
Course Topics
  • Describing Cisco MDS Platform
    • Cisco MDS 9700/9300/9200/9100 Hardware
    • Cisco NX-OS
    • Cisco DCNM
    • Fibre Channel Architecture
    • FCoE Architecture
  • Describing Key Product Features
    • Cisco DCNM 11.x
    • RBAC and Authentication, Authorization, and Accounting (AAA)
    • Virtual SANs
    • NPV and NPIV
    • Port Channels and VSAN Trunking
    • Zoning and Smart Zoning
    • Device Aliases
    • Inter-VSAN Routing
    • Fibre Channel Fabric Security
  • Describing New Product Features
    • 32-Gb Fibre Channel
    • Cisco MDS NX-API
    • Power-On Auto-Provisioning
    • Slow Drain Analysis
    • Analytics and SAN Telemetry Streaming
    • Cisco Secure Boot
  • Deploying Cisco MDS Features
    • Installation and Initial Setup
    • Building a Fabric: FC Domains and FC Services
    • Building SAN Extensions
  • Troubleshooting Common Cisco MDS Issues
    • Fibre Channel Domains
    • Zones and Zone Merges
    • Boot and Upgrade Issues
Lab Topics

  • Set Up DCNM
  • Explore DCNM-SAN Client and DCNM Device Manager
  • Configure and Use RBAC
  • Configure and Use RBAC with DCNM-SAN Client and Device Manager
  • Manage VSANs and Fibre Channel Domain
  • Configure NPV and N-Port Identification Virtualization (NPIV)
  • Configure Interfaces
  • Configure Device Aliases and Zoning
  • Explore and Automate with NX-API
  • Perform Slow Drain Analysis with Cisco DCNM
  • Configure SAN Analysis and SAN Telemetry Streaming
  • Configure FCIP Tunnels and FCIP High Availability (HA)
  • Configure IVR for SAN Extension
  • Troubleshoot Zoning and Zone Merges
Virtual Classroom
  • Instructor led online training is an ideal vehicle for delivering training to individuals anywhere in the world at any time.
  • This innovative approach presents live content with instructor delivering the training online.
  • Candidates will be performing labs remotely on our labs on cloud in presence of an online instructor.
  • Rstforum uses microsoft lync engine to deliver instructor led online training.
  • Advances in computer network technology, improvements in bandwidth, interactions, chat and conferencing, and realtime audio and video offers unparalleled training opportunities.
  • Instructor led online training can helps today’s busy professionals to perform their jobs and upgrade knowledge by integrating self-paced instructor led online training in their daily routines.
Miscellaneous
  • Minimum batch size required for batch is 10 participants in the this course.
  • The RST Forum reserves the right to cancel/postpone the class.
  • Course schedule will be provided before commencement of the course.
  • Certificate of participation will be awarded to participants with a minimum 90% attendance.
  • All attendees are to observe the Copyright Law on intellectual properties such as software and courseware from respective vendors.
  • The RST Forum reserves the right to include external participants in the program either for the entire course or individual courses.
  • The RST Forum reserves the right to change/alter the sequence of courses. RST FORUM published Book would be given at 50% discounted rate to the forum students.