Menu

CCIE R&S

Level
Advanced
Duration
100 hours
Course Fee
₹75000
*Inclusive of GST   

For network engineers who need to increase their value to employers and stay current with advances in networking knowledge and skills, the Cisco CCIE course is designed to provide professionals with extensive networking expertise and knowledge to accomplish their day to day job and pass CCIE R&S Lab Exam.

Training Type
Classroom Online Corporate
Batch Timings

For the latest training schedule, please check the Schedules.

Weekdays
  • Early Morning
  • Morning
  • Afternoon
  • Evening
  • Fastrack
Weekdays
  • Morning
  • Afternoon
  • Evening
  • Sat / Sun
  • Sunday Only

Training is available in small groups as well as on one-to-one basis. Get in touch.

CCIE R&S

Level
Advanced
Duration
100 hrs.
Course Fee
₹75000

For network engineers who need to increase their value to employers and stay current with advances in networking knowledge and skills, the Cisco CCIE course is designed to provide professionals with extensive networking expertise and knowledge to accomplish their day to day job and pass CCIE R&S Lab Exam.

Training Type
Classroom Online Corporate
Batch Timings

For the latest training schedule, please check the Schedules.

Weekdays
  • Early Morning
  • Morning
  • Afternoon
  • Evening
  • Fastrack
Weekdays
  • Morning
  • Afternoon
  • Evening
  • Sat / Sun
  • Sunday Only

Training is available in small groups as well as on one-to-one basis. Get in touch.

Course Introduction

The CCIE R&S certification designed to meet the objective of the CCIE R&S program. The course is customized keeping in mind the ultimate aim of achieving technology expertise and CCIE R&S Lab Exam. Boot camp includes intensive CCIE-lab workshop to improve time-management & troubleshooting skills. At the end of the boot camp students are ready to attempt the CCIE lab exam at Cisco Systems.

The CCIE Routing and Switching certification is a respected networking certification, recognizing network engineers for their knowledge, skills and expertise of Cisco solutions. This training will provide you with profound technical knowledge to design and implement complex solutions. The eight-hour lab exam tests your ability to configure actual equipment and troubleshoot the network in a timed test situation. You must make an initial attempt of the CCIE lab exam within 18-months of passing the CCIE written exam. If you do not pass the lab exam within three years of passing the written exam, you must retake the written exam before being allowed to attempt the lab exam again.

Course Highlights

This 20 day (Weekdays – 5hrs.) OR 12-week (Sunday/Saturday) instructor led CCIE course is designed to provide professionals with extensive networking expertise and knowledge to accomplish their day to day job and pass CCIE R&S Lab Exams. The key to a high success rate is based on the program’s objectives as follows:

  • Course contents are based on Cisco guide lines and cover’s all topics for CCIE LAB.
  • Renewed experience with ingenious CCIE workbook from RST LABS.
  • Dedicated Monitoring to evaluate candidates’ progress
  • LAB Book fortified with near real LABS and troubleshooting scenarios that guaranteed your success in CCIE LAB exams
  • Extensive hands-on lab exercises
  • Industry experienced certified instructors
  • LABs on cloud available for practice from home.
  • Extra Rack access available on chargeable basis
  • Fees Refund if you are not satisfied with training delivered.
  • Dedicated Monitoring to evaluate and report candidates progress
  • Regular evaluation.
  • The course is customized keeping in mind the ultimate aim of achieving technology expertise and CCIE R&S lab Exam.
  • Boot camp includes intensive CCIE-lab workshop to improve time-management & troubleshooting skills
  • Optimal balance of theory classes and practical labs every week to ensure maximum absorption of technology by participants
  • Customized tests at the end of course to be attempted by every participant
  • Stringent passing standards with progress report of each participant
  • Repeating of lectures allowed (based on seat availability)
  • Project manager will track Progress and performance of the candidates for CCIE Labs
Course Objectives

After you complete this course you will be able to:

  • Discuss the CCIE R&S Lab Program and its content and elaborate on approach to expertise technologies required to pass CCIE Lab exam
  • Discuss your baseline status for Cisco CCIE lab readiness
  • Expertise L2 features and functions and master the skills of monitoring, analysis, configuration and troubleshooting L2 Technologies.
  • Resolve expert-level IPv4 and IPv6 connectivity issues
  • Expertise L3 Protocols, develop proficiency on L3 features and functions and master the skills of monitoring, analysis, configuration and troubleshooting L3 Protocols.
  • Expertise BGP, develop proficiency on multi-homed environment, BGP attributes and master the skills of monitoring, analysis, configuration and troubleshooting BGP.
  • Resolve expert-level core task in multi-protocol environment, analysis, configuration, and troubleshooting looping issue.
  • Resolve expert-level DMVPN, MPLS L3 VPN configuration tasks.
  • Expertise Multicast and its Protocols, develop proficiency on monitoring, analysis, configuration and troubleshooting Multicast.
  • Expertise MQC QoS features and functions and master the skills of monitoring, analysis, configuration and troubleshooting QoS Techniques.
  • Resolve and configure expert-level IP / Network Services task, Monitor, analyse, configure, and troubleshoot issues related to IP / Network Services
  • Resolve expert-level multi-protocol, multi-technology, multi-featured core and advanced issues. Monitor, analyse, configure, and troubleshoot issues
  • Expertise the logic of controlling access to networks & devices, minimizing overhead traffic, select and configure the appropriate access list features.
  • Understand and configure new IOS features in multi-protocol environment.
Course Topics

LAYER 2 TECHNOLOGIES:

  • LAN switching technologies
    • Implement and troubleshoot switch administration
    • Managing MAC address table
    • errdisable recovery
    • L2 MTU
  • Implement and troubleshoot layer 2 protocols
    • CDP, LLDP
    • UDLD
  • Implement and troubleshoot VLAN
    • access ports
    • VLAN database
    • normal, extended VLAN, voice VLAN
  • Implement and troubleshoot trunking
    • VTPv1, VTPv2, VTPv3, VTP pruning
    • dot1Q
    • Native VLAN
    • Manual pruning
  • Implement and troubleshoot etherchannel
    • LACP, PAgP, manual
    • layer 2, layer 3
    • load-balancing
    • etherchannel misconfiguration guard
  • Implement and troubleshoot spanning-tree
    • PVST+/RPVST+/MST
    • switch priority, port priority, path cost, STP timers
    • port fast, BPDUguard, BPDUfilter
    • loopguard, rootguard
  • Implement and troubleshoot other LAN switching technologies
    • SPAN, RSPAN, ERSPAN

LAYER 2 MULTICAST:

  • Implement and troubleshoot IGMP
    • IGMPv1, IGMPv2, IGMPv3
    • IGMP snooping
    • IGMP querier
    • IGMP filter
    • IGMP proxy
  • Layer 2 WAN circuit technologies
    • Implement and troubleshoot HDLC
    • Implement and troubleshoot PPP
    • authentication (PAP, CHAP)
    • PPPoE
    • MLPPP
  • Troubleshooting layer 2 technologies
    • Use IOS troubleshooting tools
    • debug, conditional debug
    • ping, traceroute with extended options
    • Embedded packet capture
  • Apply troubleshooting methodologies
    • Diagnose the root cause of networking issue (analyze symptoms, identify and describe root cause)
    • Design and implement valid solutions according to constraints
    • Verify and monitor resolution
  • Interpret packet capture
    • Using wireshark trace analyzer
    • Using IOS embedded packet capture

LAYER 3 TECHNOLOGIES:

  • Addressing technologies
    • Identify, implement and troubleshoot IPv4 addressing and sub-netting
    • Address types, VLSM
    • ARP
    • Identify, implement and troubleshoot IPv6 addressing and sub-netting
    • Unicast, multicast
    • EUI-64
    • ND, RS/RA
    • Autoconfig/SLAAC temporary addresses (RFC4941)
    • Global prefix configuration feature

LAYER 3 MULTICAST:

  • Troubleshoot reverse path forwarding
  • RPF failure
  • RPF failure with tunnel interface
  • Implement and troubleshoot IPv4 protocol independent multicast
  • PIM dense mode, sparse mode, sparse-dense mode
  • Static RP, auto-RP, BSR
  • Bidirectional PIM
  • Source-specific multicast
  • Group to RP mapping
  • Multicast boundary
  • Implement and troubleshoot multicast source discovery protocol
  • Intra-domain MSDP (anycast RP)
  • SA filter

FUNDAMENTAL ROUTING CONCEPTS:

  • Implement and troubleshoot static routing
  • Implement and troubleshoot default routing
  • Compare routing protocol types
  • Distance vector and link state
  • Path vector
  • Implement, optimize and troubleshoot administrative distance
  • Implement and troubleshoot passive interface
  • Implement and troubleshoot VRF lite
  • Implement, optimize and troubleshoot filtering with any routing protocol
  • Implement, optimize and troubleshoot redistribution between routing protocols
  • Implement, optimize and troubleshoot manual and auto summarization with any routing protocol
  • Implement, optimize and troubleshoot policy-based routing
  • Identify and troubleshoot sub-optimal routing
  • Implement and troubleshoot bidirectional forwarding detection
  • Implement and troubleshoot loop prevention mechanisms
  • Route tagging, filtering
  • Split horizon
  • Route poisoning
  • Implement and troubleshoot routing protocol authentication
  • MD5
  • Key-chain
  • EIGRP HMAC SHA2-256bit
  • OSPFv2 SHA1-196bit
  • OSPFv3 IPsec authentication

RIP v2:

  • Implement and troubleshoot RIPv2

EIGRP (for IPv4 and IPv6)

  • Describe Packet types
  • Packet types (hello, query, update, and such)
  • Route types (internal, external)
  • Implement and troubleshoot neighbor relationship
  • Multicast, unicast EIGRP peering
  • Implement and Troubleshoot Loop free path selection
  • RD, FD, FC, successor, feasible successor
  • Classic metric
  • Wide metric
  • Implement and troubleshoot operations
  • General operations
  • Topology table, update, query, active, passive
  • Stuck in active
  • Graceful shutdown
  • Implement and troubleshoot EIGRP stub
  • Stub
  • leak-map
  • Implement and troubleshoot load-balancing
  • Equal-cost
  • Unequal-cost
  • Add-path
  • Implement EIGRP (multi-address) named mode
  • Types of families
  • IPv4 address-family
  • IPv6 address-family
  • Implement, troubleshoot and optimize EIGRP convergence and scalability
  • Describe fast convergence requirements
  • Control query boundaries
  • IP FRR/fast reroute (single hop)
  • Summary leak-map
  • Summary metric

OSPF (v2 and v3):

  • Implement and troubleshoot RIPv2
  • Describe packet types
  • LSA types (1, 2, 3, 4, 5, 7, 9)
  • Route types (N1, N2, E1, E2)
  • Implement and troubleshoot neighbour relationship
  • Implement and troubleshoot OSPFv3 address-family support
  • IPv4 address-family
  • IPv6 address-family
  • Implement and troubleshoot network types, area types and router types
  • Point-to-point, multipoint, broadcast, non-broadcast
  • LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
  • Internal router, ABR, ASBR
  • Virtual link
  • Implement and troubleshoot path preference
  • Implement and troubleshoot operations
  • General operations
  • Graceful shutdown
  • GTSM (generic TTL security mechanism)
  • Implement, troubleshoot and optimize OSPF convergence and scalability
  • Metrics
  • LSA throttling, SPF tuning, fast hello
  • LSA propagation control (area types, ISPF)
  • IP FR/fast reroute (single hop)
  • LFA/loop-free alternative (multi hop)
  • OSPFv3 prefix suppression

BGP:

  • Describe, implement and troubleshoot peer relationships
  • Peer-group, template
  • Active, passive
  • States, timers
  • Dynamic neighbours
  • Implement and troubleshoot IBGP and EBGP
  • EBGP, IBGP
  • 4 bytes AS number
  • Private AS
  • Explain attributes and best-path selection
  • Implement, optimize and troubleshoot routing policies
  • Attribute manipulation
  • Conditional advertisement
  • Outbound route filtering
  • Communities, extended communities
  • Multi-homing
  • Implement and troubleshoot scalability
  • Route-reflector, cluster
  • Confederations
  • Aggregation, AS set
  • Implement and troubleshoot multi-protocol BGP
  • IPv4, IPv6, VPN address-family
  • Implement and troubleshoot AS path manipulations
  • Local AS, allow AS in, remove private AS
  • Prepend
  • Regexp
  • Implement and Troubleshoot Other Features
  • Multipath
  • BGP synchronization
  • Soft reconfiguration, route refresh

TROUBLESHOOTING LAYER 3 TECHNOLOGIES:

  • Use IOS troubleshooting tools
  • Debug, conditional debug
  • Ping, traceroute with extended options
  • Embedded packet capture
  • Apply troubleshooting methodologies
  • Diagnose the root cause of networking issue (analyze symptoms, identify and describe root
  • Design and implement valid solutions according to constraints
  • Verify and monitor resolution
  • Interpret packet capture
  • Using wireshark trace analyzer
  • Using IOS embedded packet capture

VPN TECHNOLOGIES:

  • Tunneling
    • Implement and troubleshoot MPLS operations
    • Label stack, LSR, LSP
    • LDP
    • MPLS ping, MPLS trace route
    • Implement and troubleshoot basic MPLS L3VPN
    • L3VPN, CE, PE, P
    • Extranet (route leaking)
    • Implement and troubleshoot encapsulation
    • GRE
    • Dynamic GRE
    • Implement and troubleshoot DMVPN (single hub)
    • NHRP
    • DMVPN with IPsec using preshared key
    • QoS profile
    • Pre-classify

 

  • Encryption
    • Implement and troubleshoot IPsec with preshared key
    • IPv4 site to IPv4 site
    • IPv6 in IPv4 tunnels
    • Virtual tunneling interface (VTI)

TROUBLESHOOTING VPN TECHNOLOGIES:

  • Use IOS troubleshooting tools
  • Debug, conditional debug
  • ping, trace route with extended options
  • Embedded packet capture
  • Apply troubleshooting methodologies
  • Diagnose the root cause of networking issue (analyse s, identify and describe root cause)
  • Design and implement valid solutions
  • According to constraints
  • Verify and monitor resolution
  • Interpret packet capture
  • Using Wireshark trace analyser
  • Using IOS embedded packet capture

INFRASTRUCTURE SECURITY:

  • Device security
    • Implement and troubleshoot IOS AAA using local database
    • Implement and troubleshoot device access control
    • Lines (VTY, AUX, console)
    • SNMP
    • Management plane protection,
    • Password encryption
    • Implement and troubleshoot control plane policing

NETWORK SECURITY:  

  • Implement and troubleshoot switch security features
  • VACL, PACL
  • Storm control
  • DHCP snooping
  • IP source-guard
  • Dynamic ARP inspection
  • Port-security
  • Private VLAN
  • Implement and troubleshoot router security features
  • IPv4 access control lists (standard, extended, time-based)
  • IPv6 traffic filter

BGP:

  • Unicast reverse path forwarding
  • Implement and troubleshoot IPv6 first hop security
  • RA guard
  • DHCP guard
  • Binding table
  • Device tracking
  • ND inspection/snooping
  • Source guard
  • PACL

TROUBLESHOOTING INFRASTRUCTURE SECURITY:

  • Use IOS troubleshooting tools
  • Debug, conditional debug
  • Ping, trace route with extended options
  • Embedded packet capture
  • Apply troubleshooting methodologies
  • Diagnose the root cause of networking issue (analyse, identify and describe root cause)
  • Design and implement valid solutions according to constraints
  • Verify and monitor resolution
  • Interpret packet capture
  • Using wire shark trace analyser
  • Using IOS embedded packet capture.

INFRASTRUCTURE SERVICES:

  • System management
    • Implement and troubleshoot device management
    • Console and VTY
    • Telnet, HTTP, HTTPS, SSH, SCP
    • (T)FTP
    • Implement and troubleshoot SNMP
    • v2c, v3
    • Implement and troubleshoot logging
    • Local logging, syslog, debug, conditional debug
    • Timestamp

NETWORK SERVICES:

  • Implement and troubleshoot first-hop redundancy protocols
  • HSRP, GLBP, VRRP
  • Redundancy using IPv6 RS/RA
  • Implement and troubleshoot network time protocol
  • NTP master, client, version 3, version 4
  • NTP authentication
  • Implement and troubleshoot IPv4 and IPv6 DHCP
  • DHCP client, IOS DHCP server, DHCP relay
  • DHCP options
  • DHCP protocol operations
  • SLAAC/DHCPv6 interaction
  • Stateful, stateless DHCPv6
  • DHCPv6 prefix delegation
  • Implement and troubleshoot IPv4 network address translation
  • Static NAT, dynamic NAT, policy-based NAT, PAT
  • NAT ALG

NETWORK OPTIMISATION:

  • Implement and troubleshoot IP SLA
  • ICMP, UDP, jitter, VoIP
  • Implement and troubleshoot tracking object
  • Tracking object, tracking list
  • Tracking different entities (e.g. interfaces, routes, IPSLA, and such)
  • Implement and troubleshoot netflow
  • Netflow v5, v9
  • Local retrieval
  • Export (configuration only)
  • Implement and troubleshoot embedded event manager
  • EEM policy using applet 2013

TROUBLESHOOTING INFRASTRUCTURE SERVICES:

  • Use IOS troubleshooting tools
  • Debug, conditional debug
  • Ping, trace route with extended options
  • Embedded packet capture
  • Apply troubleshooting methodologies
  • Diagnose the root cause of networking issue (analyse, identify and describe root cause)
  • Design and implement valid solutions according to constraints
  • Verify and monitor resolution
  • Interpret packet capture
  • Using Wireshark trace analyser
  • Using IOS embedded packet capture
Lab Topics

Not Available


Virtual Classroom
  • Instructor led online training is an ideal vehicle for delivering training to individuals anywhere in the world at any time.
  • This innovative approach presents live content with instructor delivering the training online.
  • Candidates will be performing labs remotely on our labs on cloud in presence of an online instructor.
  • Rstforum uses microsoft lync engine to deliver instructor led online training.
  • Advances in computer network technology, improvements in bandwidth, interactions, chat and conferencing, and realtime audio and video offers unparalleled training opportunities.
  • Instructor led online training can helps today’s busy professionals to perform their jobs and upgrade knowledge by integrating self-paced instructor led online training in their daily routines.
Miscellaneous
  • Minimum batch size required for batch is 10 participants in the this course.
  • The RST Forum reserves the right to cancel/postpone the class.
  • Course schedule will be provided before commencement of the course.
  • Certificate of participation will be awarded to participants with a minimum 90% attendance.
  • All attendees are to observe the Copyright Law on intellectual properties such as software and courseware from respective vendors.
  • The RST Forum reserves the right to include external participants in the program either for the entire course or individual courses.
  • The RST Forum reserves the right to change/alter the sequence of courses. RST FORUM published Book would be given at 50% discounted rate to the forum students.